Share on: Post on Facebook Add to your del.icio.us Digg this story StumbleUpon Twitter
Home | FAQ | Arconomic

Arconomic

Arconomic system! What does it consists?

It is a reconditioning system derived and designed after development efforts of over three decades and exposure to variety of industrial components to provide most scientific, suitable and economical industrial ...


What exposure and experience of components you have?

Exposure and experience of thousands of components in last 50 years of working for cement, steel, mining, power, coal, fibre, paper, chemical, fertilizer, petrochemical, fabrication, transport, heavy engineering, etc. industries ...


What scientific approach and test carried out in this system to ensure quality and reliability?

The system incorporate all components undergo vibration Stress Relieving to relieve residual stresses which might have been accumulated in service and or in failure. This stabilizes the component dimensionally and ...


Is it possible to repair a component on site with this system and process?

It is very much possible to do on site repair with this process. However economics should be seen as hiring and transportation of manpower and other sophisticated machines, installation etc. ...


I have a component in which seating area/journal shows deep scoring of over 2 mm depth. Can the scoring be reclaimed?

Yes the scoring can definitely be reclaimed by rebuilding entire length of seating area/journal to required sizes. In special cases where entire length is not to be built up, a ...


In one of my component the bearing seat/journal area worn out over 5 mm and shows an ovality. Is it possible to rebuild? Also what thickness can be build up to compensate wear?

Thickness is  no  limitation.  We  have  number  of  cases  where  the build-up  of  over  10  mm in thickness has been made with this process.  ...


At this low temperature how the bonding is achieved?

Perfect. Unlike metal spray, powder spray, arc and frame spray and other methods where the build up has only mechanical bond this process gives fused bond which is much reliable ...


Amazing! Will you explain the process in brief?

The  process  involves  sintering  at  very  high  velocity  freshly  atomized  metal  carried  by  a media at -20° C.  to the job. The atomized grain with such high velocity when hit the ...


total: 12 | displaying: 1 - 10